
|
|
|
|
|
|
|
|
|
 |
|
| |
| |
Length: 132.00 cm/51.97 in.
Mid width: 41.65 cm/16.40 in.
Tip width: N/A
Surface Area: 1,843.83 cm/725.92 in.
Weight: N/A
Rocker: 6.35 cm/2.50 in.
Rocker type: Three-stage
Skill level: Advanced
Fin configuration: Four on each end. Two alloy center fins and two molded-in outer fins.
Weight range: Up to 160 lbs.
Stance width range: 43.18 cm/17.00 in. to 58.42 cm/23.00 in.
Construction: N/A
“The combination of the round belly and hard tip and tail make it both a relaxed but aggressive feel depending on where you distribute your weight on the board. The round rails through the center make it hard to take that all too familiar digger and gives the board a quicker release off the wake in all water conditions. The hard tip and tail give the board a strong edge to drive up through the wake. It’s the first time in ten years that I am content to do nothing but soul turns on a wakeboard.” D. Harf
Variable edge, shallow molded fins and cupped rails help this board transition with a relaxed transfer as the rider weight shifts back from a softer rail in the belly to a harder edge in the tail
10.8-degree rocker – the most explosive impact off the wake in our line
2.5” staged rocker
Thin profile reducing swing weight
Clean center bottom design – if a board lands fast there is no need to have center beams
Artwork - UV clear top/chrome emblem/pearl ink/chrome sticker
4 alloy One fins and 4 molded tabs
Danny Harf approval
|
|
|
|
|
|
|
|
|